BMS-A10 MICRO, VERTICAL MOUNT, HV-DIGITAL, F3K
Blue Bird has entered the F3K/DLG servo market with these new micro digital servos. Purpose built for F3K.
The A10 digital series of servos feature metal gears, cnc aluminum cases, and a coreless motor. The A10 series are some of the lowest weight F3K servos available at just 7.3-7.4 grams depending on case configuration.
Capable of use with 1-2 cell LiPo batteries.
Blue Bird boasts impressive specifications for these units. Click the link below for a detailed specification sheet.
Data Sheet Here
APPLICATION / SUITABLE
| 3D Airplane / DLG / HLG / F3K / F3P |
SPECIFICATIONS
| Torque At 3.7V |
1.6 kg-cm / 22.2 oz-in |
| Torque At 6.0V |
2.4 kg-cm / 33.3 oz-in |
| Torque At 7.4V |
2.9 kg-cm / 40.3 oz-in |
| Torque At 8.4V |
3.2 kg-cm / 44.5 oz-in |
| Speed At 3.7V |
0.15 sec / 60° |
| Speed At 6.0V |
0.10 sec / 60° |
| Speed At 7.4V |
0.08 sec / 60° |
| Speed At 8.4V |
0.07 sec / 60° |
POWER SUPPLY
| Operating Voltage Range |
3.7V ~ 8.4V ( 3 ~ 6 Cell Ni-MH or 1 ~ 2S LiPo / 2S LiFe ) |
MICRO SERVO
| Control System |
Digital Controller 12-Bits ( 4096 Steps ) / Frequency：333Hz / Neutral：1500us |
| Dead Band Width |
0.002ms ( 2us ) |
| Frame Rate (Signal repeat rate) |
3ms ( Maximum ) |
| Rotating Direction |
Clockwise / Pulse Traveling 1500 ~ 1900u sec |
| Operating Travel |
90° ( When 1100 ~ 1900 μ sec ) |
MECHANICAL SPECIFICATIONS
| Ball Bearing |
Dual, Stainless |
| Gear |
All Precision Metal Gears |
| Motor |
Metal-Brush Coreless Motor |
| Horn / Gear Spline |
19 Teeth ( φ3.65 m/m ) |
| Cable Length |
150 mm ( 5.9 in ) |
| Connector |
Universal Connector ( J-Type ) |
PHYSICAL SPECIFICATIONS
| Dimension (mm) |
22 x 8 x 15.3 mm / 0.86 x 0.31 x 0.60 in |
| Weight (gram) |
7.4 ± 0.5 grams / 0.26 oz |
